Factory price Food-Grade Platinum Cure Silicone RTV-2 Liquid Silicone Rubber for mold making

short description:

Features
1. Have good liquidity, high temperature resistance, corrosion resistance, and high tensile and tear strength, small shrinkage rate, higher rolling over time.
2. Low shrinkage rate, not emit low molecular crosslinking process, so the volume, shrinkage rate is less than 0.1%.
3. Without being limited by the product thickness, depth of curing.
4. This product has excellent resistance to high temperature, the temperature can reach -60-120 ℃.
5. Liquidity is good, easy perfusion; Can room temperature curing and heat curing, easy to operate.

Send email to us WhatsApp inquiry now

Product Detail

Product Tags

Operation Instruction

1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container.
3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes.
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes. (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame.

Factory price Food-Grade Platinum Cure Silicone RTV-2 Liquid Silicone Rubber for mold making (1)

Factory price Food-Grade Platinum Cure Silicone RTV-2 Liquid Silicone Rubber for mold making (2)

Factory price Food-Grade Platinum Cure Silicone RTV-2 Liquid Silicone Rubber for mold making (3)

Silicone Mold Making Liquid Silicone Rubber Non-Toxic Translucent Clear Mold Making Silicone-Mixing Ratio 1:1-Molding

Liquid Translucent Silicone Rubber for Silicone Mold Making, DIY Epoxy Resin Mold

Easy 1:1 Mixing Ratio Silicone for Casting, Jewelry Making, Manual, Craft PREMIUM MOLD MAKING SILICONE MATERIAL: Our translucent liquid silicone is made by safe silicone material, non-toxic and no odor, very flexible, soft, and clear. You could also mix this molding silicone with mica powder to create new colors.

EASY MIXING & POURING: This silicone mold making kit is 2 part silicone, including part A and part B, the mixing ratio is 1:1. Pour the Part A and Part B together, then stir the mold silicone mixture for 5 minutes, make sure to stir the silicone rubber mixture thoroughly for better results.

NO BUBBLES: The bubbles of the liquid rubber mixture will automatically disappear within 2 hours, no vacuum degassing is necessary. The working time is 5 minutes at room temperature and the complete cure time is at least 12 hours at room temperature, it varies on your mold size and thickness. If it's s little sticky, please extend the curing time.

GREAT FOR BEGINNER: If you're new to silicone mold making, CNMI mold making silicone kit is a perfect choice for you to try! No special skills or tools are needed. You could enjoy this fun and creative activity all day.

HOW to CLEAN: If there's any spill, please clean with soapy water or rubbing alcohol.

WIDE APPLICATION: It's very ideal for art craft use, DIY your own resin molds, wax molds, candle molds, use to make molds for resin, wax, soap, casting, etc.

ATTENTION: Not for making food mold use.