LSR silicone characteristics
1.LSR silicone is the AB dual group division, mixed and stirred evenly the A and B by the weight ratio of 1: 1, The operation time is ~30 minutes, the curing time is ~2 hours,and de-mold in 8 hours.
2. The hardness is divided into: super soft silicone -below 0A, 0A-60A mold silicone,
has the advantages of long color lasting and great elasticity
3. Under normal temperature,the viscosity of LSR silicone is about 10,000, which is much sparse than the condensation mold silicone,
so it can be used as an injection molding raw material
4. LSR silicone is also called platinum curing silicone. This silicone raw material uses platinum as a catalyst in the polymerization reaction. There will be no decomposition objects.
with nearly none smell,the LSR silicone is widely used for making food molds and adults. It‘s the most environmental high level silicone material.
5. LSR silicone is transparent liquid,can use environmentally friendly color cream to excellent color.
6. LSR silicone can be cured by room temperature, also can be heated and accelerated.
The storage temperature can go from low -60 ° C up to high temperature of 350 ° C, which does not affect the essence of this food-grade environmentally friendly silicone.
Characteristics of silicone for addition molds
1. Addition type silica gel is a two-component AB. When using it, mix the two in a weight ratio of 1:1 and stir evenly. It takes 30 minutes of operation time and 2 hours of curing time. It can be removed after 8 hours. Use the mold, or put it in the oven and heat it to 100 degrees Celsius for 10 minutes to complete the curing.
2. The hardness is divided into sub-zero super-soft silica gel and 0A-60A mold silica gel, which has the advantages of long-lasting non-discoloration and good elasticity.
3. The normal temperature viscosity of addition-type silica gel is about 10,000, which is much thinner than condensation-type silica gel, so it can be used as a raw material for injection molding.
4. Addition type silica gel is also called platinum cured silica gel. This kind of silicone raw material uses platinum as the catalyst in the polymerization reaction. It does not produce any decomposition products. It has no smell and is widely used in making food molds and adult sexual products. It is a material with the highest environmental protection level among silica gels.
5. Addition-type silica gel is a transparent liquid, and colorful colors can be mixed with environmentally friendly color paste.
6. Addition silicone can be cured at room temperature or heated to accelerate curing. Daily storage can withstand low temperatures of -60°C and high temperatures of 350°C without affecting the nature of food-grade environmentally friendly silicone.
-
Manufactory Price RTV-2 Liquid Silicone Rubber ...
-
Factory price Food-Grade Platinum Cure Silicone...
-
High quality mold making silicone food grade fo...
-
liquid silicone rubber for silicon resin mold l...
-
Translucent Medical food grade cake molds plati...
-
Manufactory price RTV-2 liquid silicone rubber ...
